ROOTVG - AIX & POWER Portal

dynamic memroy allocation in LPARs

Home

Help

Login

Register

	Welcome, Guest. Please login or register. Did you miss your activation email?	August 28, 2008, 05:07:31 AM
		Login with username, password and session length

ROOTVG > AIX > Administration > dynamic memroy allocation in LPARs

Pages: [1] Go Down

Print

	Author	Topic: dynamic memroy allocation in LPARs (Read 884 times)
0 Members and 1 Guest are viewing this topic.

Michael

Administrator
Hero Member

Offline

Posts: 466

Re: dynamic memroy allocation in LPARs

« Reply #5 on: May 21, 2008, 01:07:53 PM »

SAP should know what settings are needed on AIX to support these huge memory models. From the man page on shmget()
Technical Reference: Base Operating System and Extensions, Volume 2 shmget Subroutine Purpose Gets shared memory segments. Library Standard C Library (libc.a) Syntax #include <sys/shm.h> int shmget (Key, Size, SharedMemoryFlag) key_t Key; size_t Size int SharedMemoryFlag; Description The shmget subroutine returns the shared memory identifier associated with the specified Key parameter. The following limits apply to shared memory: * Maximum shared-memory segment size is: o 256M bytes before AIX 4.3.1 o 2G bytes for AIX 4.3.1 through AIX 5.1 o 64G bytes for 64-bit applications for AIX 5.1 and later * Minimum shared-memory segment size is 1 byte. * Maximum number of shared memory IDs is 4096 for operating system releases before AIX 4.3.2, 131072 for releases AIX 4.3.2 through AIX 5.2, and 1048576 for release AIX 5.3 and later.

In particular I am looking at this line: o 64G bytes for 64-bit applications for AIX 5.1 and later. As you have 108G maybe the application is trying to utilize a shared memory segment > 64G. You may want to use svmon -P -t #N or svmon -S -t #n to research the largest processes and associated segments, or simply the largest segments.

There are other options to svmon to easily see the pocess data you want to see: e.g. how many shared segments is the application trying to use, etc..


	Logged

gz3xzf

Jr. Member

Offline

Posts: 11

Re: dynamic memroy allocation in LPARs

« Reply #4 on: May 20, 2008, 08:02:30 AM »

Quote from: aixdude71 on May 19, 2008, 07:28:28 PM

Well, my friend, the best advice I can give you is the obvious, if memory is all there, and there are no obvious ceilings (or floors) being hit that you can track:

Reasearch that error message with SAP and see what they reccomend. It could be one of many vmo settings that needs to be changed, call IBM and open a PMR with sysperf for tips if you like as well, but I think calling SAP would be my first choice.

Thanks for the reply, both are in hand. I'll await their responses. I just wanted to see if there was anything silly that may have come up with someone.


	Logged

aixdude71

New Member

Offline

Posts: 4

Re: dynamic memroy allocation in LPARs

« Reply #3 on: May 19, 2008, 07:28:28 PM »

Well, my friend, the best advice I can give you is the obvious, if memory is all there, and there are no obvious ceilings (or floors) being hit that you can track:

Reasearch that error message with SAP and see what they reccomend. It could be one of many vmo settings that needs to be changed, call IBM and open a PMR with sysperf for tips if you like as well, but I think calling SAP would be my first choice.


	Logged

gz3xzf

Jr. Member

Offline

Posts: 11

Re: dynamic memroy allocation in LPARs

« Reply #2 on: May 19, 2008, 04:43:56 PM »

Thanks for your reply. Grin

Quote from: aixdude71 on May 19, 2008, 04:33:06 PM

One thing you should do is insure the system sees all the new memory with prtconf and other commands like topas.

Yep, no problems there, both the prtconf -m and lsattr -El mem0 showed all the memory available, both topas and nmon the same. The partition also had enough paging space to cope.

Quote from: aixdude71

You will at some point want to verify other SAP performance tuning settings. You will need to sitdown with your SAP and/or Oracle support to determine what all your vmo settings should be, as well as AIO and other things.

Luckily enough that has also been done already. We have all been (both app support and Sys Admins) surprised by the problem.

The server was rebooted to change the profile as the maximum was not enough to allow all the CPU's and memory required and the larger memory was dynamically allocated before the app started.


« Last Edit: May 19, 2008, 04:45:40 PM by gz3xzf »	Logged

aixdude71

New Member

Offline

Posts: 4

Re: dynamic memroy allocation in LPARs

« Reply #1 on: May 19, 2008, 04:33:06 PM »

One thing you should do is insure the system sees all the new memory with prtconf and other commands like topas.

You will at some point want to verify other SAP performance tuning settings. You will need to sitdown with your SAP and/or Oracle support to determine what all your vmo settings should be, as well as AIO and other things.


	Logged

gz3xzf

Jr. Member

Offline

Posts: 11

dynamic memroy allocation in LPARs

« on: May 19, 2008, 03:44:13 PM »

Dear All

I have added quite a lot of memory to a partition using dynamic allocation (went from 32Gb to 108Gb) on a P570 server and the partition is running AIX 5300-06-03-0732. Is there anything else that needs to be done (i.e. cfgmgr, etc.)

The customer is having shared memory errors in the SAP application and I want to ensure it's not to do with the DLPAR commands.

Code:

*** ERROR => ShmGet: Shared Pool Space exhausted. PoolKey=10 [shmux.c 2700]