|
Title: Reduce Serial Port Buad Rate Post by: mahdi on November 25, 2006, 08:41:12 AM HI
i would like to know which buad rate better for hacmp configuration,because i recieved errpt with ID Number 9D30B78E . the baud rate now is 9600 and when i did errpt -a -j 9D30B78E recommended to "reduce Serial Port Buad Rate" Regards, mahdi Title: Re: Reduce Serial Port Buad Rate Post by: Michael on November 27, 2006, 03:32:45 PM 9600 Baud rate should be fine, unless you have a very long serial line (and then I mean 500 to 1000 meters long).
You can change the speed using smitty chtty select the correct tty device, and set the new speed. I would suggest 4800. If the problem continues, lower by half again, etc.. However, more probably there is a problem with your cable, or another setting. |